Steering Wheel Control interfaces allow plug and play installation of an aftermarket head unit into a vehicle whilst maintaining use of the steering wheel controls. Interfaces designed for CAN-Bus vehicles also provide the following additional features: Ignition 12V, Illumination, Speedpulse, Reverse and Park Brake. This interface connects the above mentioned stereo (which has steering control input on the rear of the unit) to the existing steering wheel stalk controls of the vehicle. Compatible Vehicles BMW 3 Series 1998-2001 E46 BMW 5 Series 1996-2001 E39 BMW 7 Series 1994-2003 E38 BMW Mini 2001-2003 BMW X5 2000-2001 E53

Price : £24.99

A professional quality lead for the most demanding live and recording situations, where the quality of the audio signal is the upmost importance. This range of signal cables are manufactured using professional quality single core,double screened OFC carbon sheild cable and are terminated with industry standard Neutrik connector on both. A 6.3mm stereo jack plug to 2 x 6.3mm mono jacks. Length:1.5 metre

Price : £11.99

LYNX Pro Professional 2-Core Speaker Lead with Neutrik NL2FC Speakon plugs. Professional quality P.A/Speaker lead manufactured to withstand the most demanding stage use. Hand built in the UK and terminated in NEUTRIK.

Price : £13.99

LYNX Pro Professional Stereo Mini Jack to 2 x Neutrik Mono Jack 6.3mm(1/4") Male Audio Insert Lead. 5-Metres. Suitable for audio/visual, a/v, live sound and studio use. Handy for connecting portable iPOD, MP3, CD or mini-disc players into amplifiers, mixing desks and other equipment requiring stereo channels on two seperate "full size" jack inputs. Fitted with genuine Neutrik 1/4" jack connectors

Price : £14.99

A high quality balanced XLR to Jack lead, constructed with very flexible 6mm non kink cable, two core lapped screen. Heavy duty suitable for live or studio work. Ideal for connecting balanced mixer outputs to active / powered monitors.Nickel Plated XLR Male to TRS Jack MaleColour: RedLength 2m (approx 6ft 6")

Price : £6.25

High Quality 3 Pin XLR Plug to 3 Pin XLR Socket Balanced Cable

Price : £3.08

LYNX 3.5mm JACK PLUG to XLR FEMALE BALANCED MONO AUDIO LEAD LYNX Professional audio lead with Mini Jack 3.5mm Male to Neutrik 3-Pin XLR female. BALANCED MONO audio signal microphone cable with gold 3-pole TRS 3.5mm plug to genuine Neutrik XLR 3-pin female inline socket for studio recording and live sound applications. Features: * Wired for BALANCED MONO (1=sleeve, 2=tip, 3=ring) * Genuine Neutrik XLR connector * 24K Gold 3.5mm Mini Jack * Oxygen-free OFC low noise cable to maximise signal and minimise loss. Ideal for connecting professional studio, vocal and instrument microphones to wireless radio packs, video recording equipment and other equipment fitted with mono minijack mic inputs

Price : £8.79

For use with various audio and PA applications. High grade audio leads, for quality audio.

Price : £7.61

Steering Wheel Control interfaces allow plug and play installation of an aftermarket head unit into a vehicle whilst maintaining use of the steering wheel controls. Interfaces designed for CAN-Bus vehicles also provide the following additional features: Ignition 12V, Illumination, Speedpulse, Reverse and Park Brake. This interface connects the above mentioned stereo (which has steering control input on the rear of the unit) to the existing steering wheel stalk controls of the vehicle. Compatible Vehicles Renault Clio 2000-2005 Renault Kangoo 2000-2005 Renault Megane 2000-2005 Renault Scenic 2000-2005 Renault Laguna 2000-2005 Renault Modus 2000-2005 Renault Traffic 2000-2005

Price : £24.99

Features: 1. 100 levels of vibration. 2. 100 levels of static (optional). 3. The levels can be altered by use of up & down button. 4. A tone button activates a tone on the receiver. 5. The system can be used for 1 or 2 receivers.POWER SAVING 6. The receiver will TURN OFF if it is unused for 4 minutes. 7. Any movement will activate the receiver into STANDBY MODE. 8. The transmitter will go into STANDBY MODE if there is no operation after 20 seconds and turn off after 2 minute. Connect the transmitter with the receivers. Before using this system, please connect your transmitter with your receivers. 1. Install the battery (2 x 4LR44/ 6V) in the transmitter and ensure the polarity is correct. 2. Adjust the channel button to the right one you want to stay. 3. Install the batteries(2xAAA 1.5V) in the receiver(please refer to how to install the batteries in receivers). 4. There is a beep right after installing the batteries in the receiver. 5. Press the Launch button from the transmitter to encode the transmitter and the receiver immediately . There is a beep again from the receiver if you encode successfully. 6. Replace cover and tighten metal probes. 7. If there is no response from the receiver, reinstall the batteries from the receiver and press launch button again. 8. This system could train up to 2 dogs at the same time.To encode different dogs, just change to different channel and repeat the procedure as described again. Package Includes: 2*AAA 1.5V battery Transmitter 2*4LR44 6V 1*dog collar 1*test light 1*English Manaul

Price : £26.60